How Much Should a Bridging or Development Finance Broker Spend on Google Ads?
A UK broker completing a few cases a month cannot read a Google Ads campaign from one month's cost per lead. Set the budget from completions per quarter, and know the minimum and the waiting time before you start.
By Ben Abel, founder of Ophiro
Published · Fact-checked · 17 min read
Market: United Kingdom. Monetary figures are in GBP. Figures and specifics on this page apply to this market and may not hold elsewhere.
The short answer
How much should a bridging or development finance broker spend on Google Ads?
Work backwards from completions, and plan by the quarter. Divide the completed cases you want by your completion, application, terms, qualification and landing-page conversion rates to find the clicks you need, multiply by your cost per click, and check that the cost per completed case sits well below the gross profit a case earns. The budget also has to buy enough qualified enquiries to be judged, and you have to be able to fund it for a full click-to-completion cycle before the first fee arrives.
Key takeaways
- Budget = clicks needed × cost per click, where clicks needed comes from dividing target completions back through your completion, application, terms, qualification and landing-page rates.
- Cost per lead contains none of the rates that decide whether a case completes, so it can fall while the cost of a completion rises.
- At a few completions a month, chance alone moves the count a long way. Plan and judge by the quarter or longer.
- The spend is committed for a full click-to-completion cycle before the first fee arrives.
- The minimum budget is the one that buys enough qualified enquiries to judge within the time you are prepared to wait.
Few completions, large fees and a long wait
A quoted cost per lead tells you what an enquiry costs and nothing about how many of those enquiries complete, how long they take or what each one earns. For a firm that completes a few cases a month, earns a large and uneven fee on each and waits weeks or months for it, those three things decide the budget.
The method applies to bridging and to development finance, but the examples use one set of assumed rates and say nothing about how the two products compare. Run the model once for each product, with its own figures.
A bridging loan is a bridge loan in the US. Completion is closing in the US and settlement in Australia, and an enquiry is an inquiry in US usage. The rest of this guide uses the UK terms.
Work back from completions
A case that starts with an ad passes through six stages.
| Stage | What it means here |
|---|---|
| Click | A paid click on a Search ad |
| Enquiry | A completed form or a phone call from one person, counted once |
| Qualified enquiry | An enquiry that passes your written hard stops |
| Terms accepted | The borrower accepts a lender's indicative terms |
| Application | A full application goes to the lender |
| Completion | The loan completes and the fee is earned |
Count terms accepted at the point the borrower accepts the lender's indicative terms, whatever that lender calls the document. What makes an enquiry qualified is covered in how to qualify a bridging finance enquiry.
Start from the completions you want and divide back up the chain.
Clicks needed = Target completions ÷ Completion rate ÷ Application rate ÷ Terms rate ÷ Qualification rate ÷ Landing-page conversion rate
Budget = Clicks needed × Average cost per click
The completion rate is one minus your fall-through rate, the share of applications that never complete. By the time a case falls through, the ad spend and the adviser's time on it have already been used.
You need six numbers of your own:
| Input | What it is | Where to find it |
|---|---|---|
| Completion rate | Completions ÷ applications | Case tracker or CRM |
| Application rate | Applications ÷ cases with terms accepted | Case tracker or CRM |
| Terms rate | Cases with terms accepted ÷ qualified enquiries | CRM |
| Qualification rate | Qualified enquiries ÷ enquiries | Enquiry records, once you have a written definition of qualified |
| Landing-page conversion rate | Enquiries ÷ clicks | Ad account and analytics |
| Average cost per click | Total cost of clicks ÷ number of clicks | Ad account, or a forecast if you are new |
If you have never advertised, Google's Keyword Planner shows estimates of the searches keywords receive and the cost to target them. Google also says that keywords with very low search volumes, or that it considers sensitive, cannot be forecast, and the same page says its policies often prevent results for keywords in sensitive categories "like health or finance". So the tool may not return a figure for the terms you try.[1] Its top-of-page bid ranges are based on the location and Search Network settings you choose, and Google expects results to be less accurate for a small geographic area.[2] Set the location to the UK, or the part of it you serve, and replace the estimate with your own figure once you have one.
Illustrative example
A broker that wants twelve completions a quarter
| Input | Assumed value |
|---|---|
| Target completions per quarter | 12 |
| Completion rate (fall-through 20%) | 80% |
| Application rate | 50% |
| Terms rate | 50% |
| Qualification rate | 40% |
| Landing-page conversion rate | 5% |
| Average cost per click | £7.00 |
| Gross profit per completed case | £7,000.00 |
Working back from twelve completions:
- Applications needed: 12 ÷ 80% = 15
- Cases with terms accepted needed: 15 ÷ 50% = 30
- Qualified enquiries needed: 30 ÷ 50% = 60
- Enquiries needed: 60 ÷ 40% = 150
- Clicks needed: 150 ÷ 5% = 3,000
Budget for the quarter is 3,000 × £7.00 = £21,000.00, which is £21,000.00 ÷ 3 = £7,000.00 a month. The campaign averages 12 ÷ 3 = 4 completions a month.
| Stage | Cost per unit (quarterly spend ÷ count) |
|---|---|
| Enquiry | £21,000.00 ÷ 150 = £140.00 |
| Qualified enquiry | £21,000.00 ÷ 60 = £350.00 |
| Terms accepted | £21,000.00 ÷ 30 = £700.00 |
| Application | £21,000.00 ÷ 15 = £1,400.00 |
| Completed case | £21,000.00 ÷ 12 = £1,750.00 |
Advertising takes £1,750.00 ÷ £7,000.00 = 25% of the gross profit on each completed case.
The break-even formula gives the same answer by another route. The enquiry-to-completion rate is 40% × 50% × 50% × 80% = 8%, so break-even cost per enquiry is £7,000.00 × 8% = £560.00, and £140.00 ÷ £560.00 = 25%.
The monthly budget and the gross profit per completed case are both £7,000.00 here. That is a coincidence of the inputs.
The figures in this example are assumptions chosen to show the arithmetic. They are not benchmarks, do not describe any country’s market and are not drawn from HTJ research. Amounts are in GBP for illustration; the sums work the same way in any currency.
Whether a quarter of gross profit is an acceptable price for a completed case is the firm's decision. How much a bridging finance customer is worth to a broker covers how fees turn into gross profit per completed case, and how to calculate break-even cost per lead covers setting a target share.
Turn the budget into the figure Google Ads asks for
In Google Ads you choose an average daily budget for each campaign, and Google's instruction for converting a monthly figure is to divide it by 30.4.[3] For most campaigns, the maximum you can pay over a month is the average daily budget multiplied by 30.4, the average number of days in a month. A campaign that starts partway through a calendar month is limited on the days it ran.[4]
Daily spend is uneven by design. On a given day a campaign might spend up to twice its average daily budget, and at the end of the month you will have spent no more than 30.4 times that budget.[5] One expensive day is no reason to change anything.
Illustrative example
The daily budget for the same broker
£7,000.00 ÷ 30.4 = £230.26 a day.
Rounded to an average daily budget of £230.00, the most the campaign can be charged in a full calendar month is 230 × 30.4 = £6,992.00. A single day can cost up to 2 × £230.00 = £460.00.
The figures in this example are assumptions chosen to show the arithmetic. They are not benchmarks, do not describe any country’s market and are not drawn from HTJ research. Amounts are in GBP for illustration; the sums work the same way in any currency.
Cost per lead leaves out the rates that decide a completion
Cost per enquiry = Average cost per click ÷ Landing-page conversion rate
Nothing that happens after the enquiry is in that formula. The qualification, terms, application and completion rates can all get worse and the cost per lead will not move.
Illustrative example
One change at a time, with the target held at twelve completions a quarter
| Change | Cost per enquiry | Clicks needed per quarter | Budget needed per quarter |
|---|---|---|---|
| Baseline | £140.00 | 3,000 | £21,000.00 |
| Fall-through rises from 20% to 40% (completion rate 60%) | £140.00 | 4,000 | £28,000.00 |
| Qualification rate falls from 40% to 30% | £140.00 | 4,000 | £28,000.00 |
| Terms rate falls from 50% to 37.5% | £140.00 | 4,000 | £28,000.00 |
| Cost per click rises from £7.00 to £8.40 | £168.00 | 3,000 | £25,200.00 |
| A looser form: landing-page rate rises from 5% to 8%, qualification rate falls from 40% to 20% | £87.50 | 3,750 | £26,250.00 |
In the three rows where a later rate worsens, cost per enquiry stays at £140.00 while the budget needed rises by £28,000.00 − £21,000.00 = £7,000.00 a quarter, a rise of one third. A 20% rise in the cost per click adds £25,200.00 − £21,000.00 = £4,200.00 a quarter, less than any of those three.
In the last row, cost per enquiry falls by £140.00 − £87.50 = £52.50 (37.5%) while the budget needed rises by £26,250.00 − £21,000.00 = £5,250.00 a quarter (25%).
Hold spend at the original £21,000.00 a quarter and let fall-through rise to 40%. The 15 applications now produce 15 × 60% = 9 completions on average, at £21,000.00 ÷ 9 = £2,333.33 per completed case against £1,750.00 at baseline. The cost per lead report still reads £140.00.
The figures in this example are assumptions chosen to show the arithmetic. They are not benchmarks, do not describe any country’s market and are not drawn from HTJ research. Amounts are in GBP for illustration; the sums work the same way in any currency.
So a campaign can report a cheaper enquiry in the same quarter that a completion becomes more expensive. The figure that sits one step closer to the fee is cost per qualified enquiry, and how to calculate cost per qualified lead explains how to measure it. Where the page and form themselves lose or turn away enquiries is covered in where a bridging finance landing page loses a fundable enquiry.
Small numbers swing by chance
The ranges in this section rest on one assumption: completions arrive independently of each other, at a steady average rate. Statisticians call this a Poisson process. Under it, the count in a period scatters around its average by about the square root of that average. This is an assumption for the arithmetic. It is not a measurement of how brokers' pipelines behave, and a real pipeline is less regular, so real swings can be wider.
Illustrative example
The same campaign over a month, a quarter and a year
The campaign from the first example averages 4 completions a month at £7,000.00 a month.
| Period | Spend | Average completions | Usual scatter (square root of the average) | Scatter as a share of the average |
|---|---|---|---|---|
| One month | £7,000.00 | 4 | 2.00 | 50% |
| One quarter | £21,000.00 | 12 | 3.46 | 29% |
| One year | £84,000.00 | 48 | 6.93 | 14% |
On the same assumption, with an average of 4 a month:
- no completions: 1.8% of months
- one completion or none: 9.2%, about one month in eleven
- two to six: 79.8%
- seven or more: 11.1%, about one month in nine
With an average of 12 a quarter: eight or fewer in 15.5% of quarters, nine to fifteen in 68.9%, sixteen or more in 15.6%.
Spend is fixed, so the reported cost per completed case moves with the count.
| Completions in the month (£7,000.00 spent) | Cost per completed case |
|---|---|
| 1 | £7,000.00 |
| 2 | £3,500.00 |
| 4 | £1,750.00 |
| 6 | £1,166.67 |
| 7 | £1,000.00 |
| Completions in the quarter (£21,000.00 spent) | Cost per completed case |
|---|---|
| 8 | £2,625.00 |
| 9 | £2,333.33 |
| 12 | £1,750.00 |
| 15 | £1,400.00 |
| 16 | £1,312.50 |
With nothing about the campaign changed, the quarterly figure reads between £1,400.00 and £2,333.33 in roughly two quarters out of three, and outside that range in the rest. The monthly figure lands between £1,166.67 and £3,500.00 in about four months out of five (two to six completions), and between £1,000.00 and £7,000.00 in 93.1% of months (one to seven). In a month with no completions there is no cost per completed case to report at all.
The figures in this example are assumptions chosen to show the arithmetic. They are not benchmarks, do not describe any country’s market and are not drawn from HTJ research. Amounts are in GBP for illustration; the sums work the same way in any currency.
In this example a month with one completion or none will turn up now and then with nothing wrong, and so will a month with seven or more. Even a quarter has a wide range. Agree that with whoever signs off the budget before the campaign starts, so that a thin month is not read as a verdict.
A few large cases can carry a quarter
A count of completions hides how uneven the fees are. Where fees scale with the size of the loan, a small number of large cases can account for a large share of a period's gross profit.
Illustrative example
Two large cases in a quarter
The quarter from the first example: £21,000.00 spent, twelve completions. Assume ten cases earn £4,200.00 gross profit each and two earn £21,000.00 each.
- Total gross profit: 10 × £4,200.00 + 2 × £21,000.00 = £84,000.00
- Average per case: £84,000.00 ÷ 12 = £7,000.00
- Share from the two large cases: £42,000.00 ÷ £84,000.00 = 50%
- Spend as a share of gross profit: £21,000.00 ÷ £84,000.00 = 25%
Now suppose the two large cases complete a few weeks later, in the next quarter.
- Completions: 10. Gross profit: 10 × £4,200.00 = £42,000.00
- Cost per completed case: £21,000.00 ÷ 10 = £2,100.00
- Spend as a share of gross profit: £21,000.00 ÷ £42,000.00 = 50%
The campaign and the cases are the same. Two completion dates moved, the count went from 12 to 10 and the gross profit halved.
The figures in this example are assumptions chosen to show the arithmetic. They are not benchmarks, do not describe any country’s market and are not drawn from HTJ research. Amounts are in GBP for illustration; the sums work the same way in any currency.
Judge the spend against gross profit, over a period long enough to include the large cases. A count of completions treats a large case and a small one alike, and a single month or quarter may or may not contain the large ones. What a bridging finance customer is worth to a broker shows how fees scale with the loan.
How long to run the campaign, and what that ties up
Measure your own time from click to completion using past cases: the date of the first enquiry and the date the loan completed. HTJ has no measured figure for it, and another firm's figure will not describe yours.
That time sets how much you spend before the campaign can pay anything back.
Spend committed = Monthly budget × Months from click to completion
Illustrative example
Six months of the same campaign
Assume every case takes 3 months from click to completion. That is an assumption for the arithmetic and should not be read as a typical figure. From month 4 the campaign completes 4 cases a month on average at £7,000.00 gross profit each, which is £28,000.00 a month, and fees are received in the month of completion.
| End of month | Cumulative ad spend | Cumulative gross profit | Position |
|---|---|---|---|
| 1 | £7,000.00 | £0.00 | £7,000.00 behind |
| 2 | £14,000.00 | £0.00 | £14,000.00 behind |
| 3 | £21,000.00 | £0.00 | £21,000.00 behind |
| 4 | £28,000.00 | £28,000.00 | Level |
| 5 | £35,000.00 | £56,000.00 | £21,000.00 ahead |
| 6 | £42,000.00 | £84,000.00 | £42,000.00 ahead |
Spend committed before the first fee is £7,000.00 × 3 = £21,000.00.
Stopping at the end of month 2 means stopping £14,000.00 in, before a single case from the campaign could have completed.
The table uses averages. Month 4 swings like any other month: about one time in eleven it brings one completion or none. Gross profit here is before the cost of handling enquiries and before overheads.
The figures in this example are assumptions chosen to show the arithmetic. They are not benchmarks, do not describe any country’s market and are not drawn from HTJ research. Amounts are in GBP for illustration; the sums work the same way in any currency.
What Google's documentation adds
Google calls the time it takes for a click to result in a conversion the conversion cycle. For imported conversions it includes the time taken for the conversion to be reported in the account.[6]
After a change to an automated bid strategy, Google says the campaign needs time to calibrate and may show a "Learning" status. The length depends mainly on the number of conversions, the length of the conversion cycle and the bid strategy. Google's wording on the length differed by language version when this guide was checked. The US English version of the page said it can take "a few conversion cycles (1-2 typically)", and the UK English version of the same page said "up to around 50 conversion events or 3 conversion cycles". Both add that it can be faster where more conversion data is present.[7]
A different Google page says Smart Bidding strategies require a standard learning phase of 7 to 14 days. It advises against frequent manual changes to budgets, targets or conversion goals during that phase, because they "will reset the learning window".[8] The two pages describe the length differently and neither says how the descriptions fit together. The advice on budgets is narrow: the word is frequent, and the page does not say what a single change does.
On judging results, Google's advice is to let at least one conversion cycle pass before evaluating performance, and to evaluate after one to two cycles so that the conversions are complete.[9] It also says to remove conversion delay from the analysis: if people typically take seven days to convert, leave out the most recent week, because its conversions are still missing.[10]
A conversion that happens after the conversion window has closed is not recorded. The default click-through window is 30 days, and the window can be set from 1 to 90 days, depending on the source of the conversion.[11]
Imports have limits of their own. Asked whether a conversion can be imported a long time after the click, Google's FAQ says a conversion with its click identifier (the GCLID) can be uploaded so long as it is "no longer than 90 days", and one with personal information for enhanced conversions so long as it is "no longer than 63 days". It also says the GCLID is retained for only 90 days. Where the conversion happens later than 90 days, Google's advice is to upload an offline conversion event that happens within 90 days.[12]
Now put the completion into those rules.
Illustrative example
The completion measured against Google's wording
Keep the assumptions from the earlier examples: 3 months from click to completion and 4 completions a month on average. Suppose the completion were the conversion the campaign bids on.
- One to two conversion cycles (the US English wording): 1 × 3 = 3 months to 2 × 3 = 6 months
- Three conversion cycles (the UK English wording): 3 × 3 = 9 months
- Fifty conversion events (the UK English wording): 50 ÷ 4 = 12.5 months
- Three calendar months is between 89 and 92 days, depending on which months they are. A completion at three months falls at or within two days of the 90-day limit for an upload by GCLID, and at least 89 − 63 = 26 days past the 63-day limit.
The figures in this example are assumptions chosen to show the arithmetic. They are not benchmarks, do not describe any country’s market and are not drawn from HTJ research. Amounts are in GBP for illustration; the sums work the same way in any currency.
That is the reasoning for bidding on a stage that arrives soon after the click and reporting on completions separately. The early stage is the enquiry, or the qualified enquiry sent back to Google Ads as an offline conversion. Smart Bidding works with imported conversions and optimises for whichever conversion types are included in the Conversions column.[12] How offline conversion tracking works for lead generation explains the mechanics.
What to read while you wait
Each month, read qualified enquiries and cost per qualified enquiry, counted by cohort so that the spend and the enquiries describe the same group of people. Watch terms accepted and applications as they arise. Read completions and gross profit quarterly, and on a rolling basis.
The minimum budget worth spending
A budget is too small when it cannot produce a countable result in a time you are prepared to wait.
Minimum monthly budget = Count needed × Cost per unit at the stage you judge ÷ Months you will wait
Google supplies one count to borrow. To evaluate Smart Bidding results accurately, it recommends measuring performance over longer periods that have at least 30 conversions, such as a month or longer, or 50 conversions for Target ROAS.[13]
That is a recommendation for evaluating results. The page does not offer it as a learning-period figure or a threshold for using Smart Bidding, and it is no statistical rule. It also refers to whatever conversion the campaign counts. Thirty qualified enquiries is Google's figure only if the qualified enquiry is the campaign's conversion action. Applied to any other stage, 30 is this guide's choice of a round count to plan with.
Illustrative example
The minimum for the same broker
Costs per unit come from the first example. The count needed is 30.
| Stage judged | Spend to reach 30 | Months at £7,000.00 a month |
|---|---|---|
| Enquiries | 30 × £140.00 = £4,200.00 | 0.6 |
| Qualified enquiries | 30 × £350.00 = £10,500.00 | 1.5 |
| Terms accepted | 30 × £700.00 = £21,000.00 | 3 |
| Completions | 30 × £1,750.00 = £52,500.00 | 7.5 |
The completions row leaves out the wait for those cases to complete.
Judging on qualified enquiries:
- Willing to wait 3 months: £10,500.00 ÷ 3 = £3,500.00 a month
- Willing to wait 2 months: £10,500.00 ÷ 2 = £5,250.00 a month
- Wanting 30 in a single month: £10,500.00 a month, which is £10,500.00 ÷ £4,200.00 = 2.5 times what 30 raw enquiries cost
At £3,500.00 a month the campaign buys £3,500.00 ÷ £140.00 = 25 enquiries, then 25 × 40% = 10 qualified enquiries, 10 × 50% = 5 cases with terms accepted, 5 × 50% = 2.5 applications and 2.5 × 80% = 2 completions a month on average, or 6 a quarter.
On the three-month assumption, spend committed before the first fee is £3,500.00 × 3 = £10,500.00.
The swings widen at this size. On the steady-rate assumption, an average of 2 a month gives no completions at all in 13.5% of months, about one month in seven, and four or more in 14.3%. An average of 6 a quarter gives three or fewer in 15.1% of quarters and nine or more in 15.3%.
The figures in this example are assumptions chosen to show the arithmetic. They are not benchmarks, do not describe any country’s market and are not drawn from HTJ research. Amounts are in GBP for illustration; the sums work the same way in any currency.
If the firm cannot fund the minimum, narrow the campaign and keep the budget concentrated: one product, the loan purposes you complete most often, a smaller part of the country.
The model gives the budget a target requires. Whether you can spend it well depends on two ceilings set out in how much a kitchen company should spend on Google Ads: search demand and capacity. Capacity for a broker is the number of live cases the advisers can handle.
Bridging and development finance need separate models
The stage rates, the time from click to completion and the fee per case are different inputs for each product. A model that blends them describes neither, so run it twice: once with your bridging figures and once with your development finance figures.
Keep the campaigns and their budgets separate, so that each can be judged against its own cycle and its own minimum.
Google's UK verification comes before any spend
Google's UK policy says that to show financial services ads of any kind in the UK, advertisers need to be verified by Google, and that as part of the process they must demonstrate that they are authorised by the Financial Conduct Authority (FCA) or qualify for one of the exemptions the page describes. It states that the requirement covers financial services "regulated by and not regulated by" the FCA, and that Google may update the requirements at any time.[14] The page gives no processing time, so complete verification before you fix a start date. This is not regulatory advice: read the policy page against your own FCA position. Which of Google's routes your firm is on, and what the application asks for, is set out in the guide to Google Ads financial services verification for bridging firms.
Run your own numbers
The lead economics calculator runs the same chain forwards from a monthly budget. It has three rates after the enquiry where this guide has four, so the fields map like this:
| Calculator field | What to enter |
|---|---|
| Qualification rate | Qualification rate |
| Appointment rate | Terms rate |
| Close rate | Application rate × completion rate |
| Average customer revenue and gross margin | Fee income per completed case and the share of it you keep |
Illustrative example
The first example in the calculator
Set the currency to GBP. Enter a monthly ad spend of £7,000.00, an average cost per click of £7.00, a landing-page conversion rate of 5%, a qualification rate of 40%, an appointment rate of 50% and a close rate of 50% × 80% = 40%.
The calculator shows 1,000 clicks, 50.0 enquiries, 20.0 qualified leads, 10.0 appointments and 4.0 customers. Cost per enquiry is £140.00, cost per qualified lead £350.00 and ad cost per customer £1,750.00, matching the first example's monthly figures.
The £7,000.00 in the first example is gross profit per completed case. To reproduce it, enter £7,000.00 as average customer revenue with a gross margin of 100%. The break-even cost per enquiry is then £560.00.
The figures in this example are assumptions chosen to show the arithmetic. They are not benchmarks, do not describe any country’s market and are not drawn from HTJ research. Amounts are in GBP for illustration; the sums work the same way in any currency.
The calculator has no fall-through field and works by the month, so do the quarterly and cash sums from this guide by hand. If you are weighing your own campaigns against bought enquiries, that comparison is in buying bridging finance leads versus generating your own.
Before the first pound is spent, write down three things: the stage you will judge the campaign on, the count you need at that stage, and the month in which you will make the call.
Limitations
- Every rate, click cost and fee in the examples is an assumption. HTJ has not measured cost per click, cost per lead, conversion rates, fall-through rates, fees or gross profit per case for UK bridging or development finance.
- HTJ has not measured how long a bridging or development finance case takes from click to completion. The three months in the cash example is an assumption for the arithmetic.
- The chance ranges assume completions arrive independently at a steady average rate. Real pipelines are less regular, so real swings can be wider.
- The model assumes the rates stay the same as spend changes. If extra budget goes on broader searches, they can fall.
- It counts ad spend only. Management fees, software and the time spent handling enquiries are extra.
- The examples describe one set of rates. They do not describe development finance separately, and HTJ has no figures on how its rates, cycle or fees differ from bridging.
- Google's budget, bidding and verification rules were read from its documentation on the dates shown in the sources and can change. Its US English and UK English help pages did not agree on the length of the learning period when read, and the guide gives both wordings. This is not regulatory or legal advice: check Google's current policy and your own FCA position.
Run the numbers
- High-Ticket Lead Economics Calculator
Model a high-ticket lead funnel from ad spend to gross profit: cost per enquiry, cost per qualified lead, customers, ROAS and break-even cost per click.
Sources
- 1.Use Keyword Planner Google Ads Help. Primary source. Verified .
- 2.About Keyword Planner forecasts Google Ads Help. Primary source. Verified .
- 3.Set and change an average daily budget for your campaign Google Ads Help. Primary source. Verified .
- 4.About spending limits Google Ads Help. Primary source. Verified .
- 5.About overdelivery and your average daily budget Google Ads Help. Primary source. Verified .
- 6.Conversion cycle: Definition Google Ads Help. Primary source. Verified .
- 7.Duration of the learning period for campaigns and what affects it Google Ads Help. Primary source. Verified .
- 8.About primary and secondary conversion actions Google Ads Help. Primary source. Verified .
- 9.How our bidding algorithms learn Google Ads Help. Primary source. Verified .
- 10.Evaluate your automated bid strategy's performance Google Ads Help. Primary source. Verified .
- 11.About conversion windows Google Ads Help. Primary source. Verified .
- 12.Offline conversion imports FAQs Google Ads Help. Primary source. Verified .
- 13.About Smart Bidding Google Ads Help. Primary source. Verified .
- 14.Financial services verification - United Kingdom Google Advertising Policies Help. Primary source. Verified .
Spotted an error? Tell us and we will correct it. Read our editorial policy.

About the author
Publisher, High Ticket Journal. Founder, Ophiro
Ben Abel publishes High Ticket Journal and is the founder of Ophiro, a customer acquisition agency that builds Google Ads, landing page and lead qualification systems for high-ticket businesses.
