Skip to content
High Ticket Journal

Guide · Kitchen renovation

How to Reduce Cost Per Lead for a Kitchen Company

There are only two ways to lower cost per lead: pay less for each click or turn more clicks into enquiries. The danger is doing either in a way that fills the diary with people who will never buy.

By , founder of Ophiro

Published · Fact-checked · 6 min read

The short answer

How can a kitchen company reduce its cost per lead?

Cost per lead equals cost per click divided by landing-page conversion rate, so you lower it by paying less per click or converting more clicks. First stop paying for clicks that cannot become projects: exclude irrelevant search terms and tighten location targeting. Then fix the page, which is yours to change: a dedicated landing page that matches the search, a short first step, a phone number that can be tapped and proof of local work. Check every change against cost per qualified lead, because several of the easiest ways to cut cost per lead can also cut lead quality.

Key takeaways

  • Cost per lead = cost per click ÷ conversion rate. Every tactic works through one of those two numbers.
  • Start with clicks that cannot become projects: exclude irrelevant search terms and tighten location targeting.
  • Click prices are set in an auction against competitors. The landing page is yours to change.
  • Some of the quickest ways to cut cost per lead can make leads worse. Track cost per qualified lead alongside it.
  • Fixes to the page and to follow-up work on the clicks you already pay for. They do not need more traffic.

The only two levers

Cost per lead

Cost per lead = Cost per click ÷ Landing-page conversion rate

A lead here is a raw enquiry (an inquiry, in US usage), and conversion rate is the share of clicks that become enquiries. Everything that reduces the cost of a lead does so by lowering the top of that fraction or raising the bottom.

Illustrative example

Which lever is worth more?

A campaign pays $4.00 a click and converts 4% of clicks into enquiries. Cost per lead is $4.00 ÷ 4% = $100.00.

  • Cut cost per click by a quarter, to $3.00: cost per lead falls to $75.00.
  • Raise conversion rate by half, to 6%: cost per lead falls to $66.67.
  • Do both: $50.00.

The figures in this example are assumptions chosen to show the arithmetic. They are not benchmarks, do not describe any country’s market and are not drawn from HTJ research. Amounts are in USD for illustration; the sums work the same way in any currency.

Neither lever is better in principle. The difference is control: click prices are set by an auction against competitors, whereas the page is entirely yours.

Lowering cost per click without losing buyers

Stop paying for searches that cannot become projects

Open the search terms report, which lists search terms that led to your ads being shown. Google includes only terms used by a significant number of people, so it is not every search.[1] Sort by cost. Anything about ideas, DIY supplies, repairs, jobs or places you do not serve is spend that produces nothing. Add those terms as negative keywords to exclude them. Google notes that negative keywords do not match close variants, so a variation of an excluded term can still trigger an ad.[2]

This does not always lower the average click price, but it removes clicks that were never going to convert, which lowers cost per lead and raises quality at once. The risk to watch is excluding too much: Google warns that with too many negative keywords your ads might reach fewer customers.[2]

Tighten the location setting

If ads are reaching people outside your service area, you are paying for clicks that cannot buy. Google's location options distinguish between reaching only people in your targeted area ("Presence") and also reaching people who have shown interest in it ("Presence or interest"). Google recommends the broader option for Search campaigns, and says to consider "Presence" when you only want people in specific locations.[3] A business that visits customers' homes is in that position, so "Presence" is the setting to test first.

Improve relevance

Quality Score is Google's diagnostic of how your expected clickthrough rate, ad relevance and landing page experience compare with other advertisers.[4] A poor rating on any of the three is a pointer to a specific weakness: an ad that does not mention what was searched for, or a page that does not deliver what the ad promised. Google says the score is not an input in the ad auction, so do not expect a set saving per point.[4] Fix the weakness and treat the score as a symptom.

Be careful with cheaper clicks

Lower bids, broader keywords and cheaper placements can all reduce the average cost per click. When they do, it is because they buy different clicks, and those may come from people further from a decision. If conversion rate falls by the same proportion as cost per click, cost per lead has not moved. If it falls by more, cost per lead has gone up.

Raising conversion rate

Google's guidance is to send people to a landing page that closely matches the ad and the keywords.[5] A visitor who searched for a kitchen company in their town should see, without scrolling: that you design and install kitchens, that you cover their area, evidence that other people nearby have used you, and one obvious next step. A homepage with a menu of five services and a slideshow makes them work for it. See homepage versus dedicated landing page.

Make the next step easy and specific

  • Offer one primary action. "Book a design consultation" is clearer than a choice between brochure, callback, quote and newsletter.
  • Keep the first step short. Ask for what you need to make the first call useful and stop there. Each extra field is more work for the visitor.
  • Make the phone number one that can be tapped. Some people would rather ring, and on a phone a number that is not a link has to be copied or retyped.
  • Say what happens next: who will call, roughly when, and what the appointment involves.

Show proof that is local and specific

Photographs of completed projects in recognisable nearby places, named reviews, guarantees and accreditations all give a stranger something to check before handing over their details. Generic stock imagery gives them nothing to check.

Make it fast on a phone

Google's advice for mobile sites starts with keeping them quick.[5] Check the device split in your own account. Where a large share of your clicks come from phones, a page that loads slowly or jumps around is the first thing those visitors meet. Test your landing page on a mid-range phone using mobile data rather than on office wi-fi.

The trap: cheaper leads that never qualify

Many shortcuts to a lower cost per lead work by attracting people who are less committed. Every tactic in the table is intended to lower cost per lead. What separates them is the likely effect on lead quality, listed from safest to riskiest. The ratings are a judgement about direction and have not been measured.

TacticLikely effect on lead quality
Remove irrelevant search termsBetter
Tighten location targetingBetter
Dedicated landing page matched to the searchBetter or unchanged
Faster mobile pageUnchanged
Shorten the form to name and phone onlyOften worse: no way to tell buyers from browsers
Offer a free brochure or price list as the main actionOften worse: attracts early research
Broader keywords or cheaper placementsUsually worse
Promotional hooks and prize drawsWorse

A qualified lead is an enquiry that passes your own checks for a real prospect, and the qualification rate is the share of enquiries that pass. After any change, compare cost per qualified lead before and after, not cost per lead. If cost per lead fell 30% and the qualification rate fell 40%, the business is paying about 17% more for each real prospect than it was (0.70 ÷ 0.60 = 1.17). Cost per lead versus cost per qualified lead for kitchen companies sets out why the two diverge.

There is a middle route on forms. A short first step followed by two or three qualifying questions on the next screen keeps the first step easy while still collecting what you need to prioritise calls. Whether it holds the conversion rate is something to measure in your own account, and what landing page conversion rate means for a high-ticket business covers how much data to collect before trusting a difference. For the questions themselves, see how to qualify kitchen renovation leads.

The lever that is not in the formula

Cost per lead ends at the enquiry. What the business pays for a customer depends on what happens next. If slow replies win fewer appointments, then slow follow-up raises your real acquisition cost, and no advertising report will show it. Before spending effort on shaving the cost of a lead, check how quickly enquiries are being answered.

An order of work

  1. Remove irrelevant search terms and fix location targeting.
  2. Move paid traffic to a dedicated page that matches the search.
  3. Simplify the first step and make the phone number work.
  4. Add local proof.
  5. Measure cost per qualified lead before and after each change.
  6. Only then test broader keywords or new offers, one at a time.

The lead economics calculator shows what a change in click cost, conversion rate or qualification rate does to the cost of a customer.

Limitations

  • The size of each effect depends on the account. No uplift figures are given because HTJ has not measured them.
  • The table of tactics and their likely effect on lead quality is the author's reasoning. It is not a measured result.
  • High-Ticket Lead Economics Calculator

    Model a high-ticket lead funnel from ad spend to gross profit: cost per enquiry, cost per qualified lead, customers, ROAS and break-even cost per click.

Sources

  1. 1.About the search terms report Google Ads Help. Primary source. Verified .
  2. 2.About negative keywords Google Ads Help. Primary source. Verified .
  3. 3.Target ads to geographic locations Google Ads Help. Primary source. Verified .
  4. 4.About Quality Score for Search campaigns Google Ads Help. Primary source. Verified .
  5. 5.Optimise your ads and landing pages Google Ads Help. Primary source. Verified .

Spotted an error? Tell us and we will correct it. Read our editorial policy.

Portrait of Ben Abel

About the author

Ben Abel

Publisher, High Ticket Journal. Founder, Ophiro

Ben Abel publishes High Ticket Journal and is the founder of Ophiro, a customer acquisition agency that builds Google Ads, landing page and lead qualification systems for high-ticket businesses.