Skip to content
High Ticket Journal

Guide · Kitchen renovation

Google Ads for Kitchen Companies: A Practical Guide

Paid search can put a kitchen company in front of people ready to buy. Whether it pays depends on seven decisions, most of them made before the first click.

By , founder of Ophiro

Published · Fact-checked · 7 min read

The short answer

How should a kitchen company run Google Ads?

Target searches that signal a full kitchen project in the area you serve, send them to a page built for that search, and tell Google which enquiries turned into qualified leads and sales. The three risks to control are loose keyword matching, wide location settings and optimising towards form fills that never qualify.

Key takeaways

  • Decide what counts as a conversion before spending. The platform optimises towards whatever you tell it to count.
  • Buy project intent. People looking for ideas, single items, DIY supplies and jobs use the same words as people commissioning a kitchen.
  • Check the location setting: the option Google recommends can show ads to people outside your service area.
  • Bid towards qualified leads, and send Google the outcome of each enquiry so the bidding has that to learn from.
  • Put cost per qualified lead at the top of the weekly report. Cost per click belongs at the bottom, and revenue follows once sales have closed.

Why kitchens are a particular case

A new kitchen is a large purchase that a household makes rarely. Whether your market calls it a kitchen renovation or a kitchen remodel, the economics are the same in three respects:

  • Each sale is worth a lot, so you can afford a meaningful cost per customer.
  • Sales are few, so you get very little conversion data and each wasted lead is expensive.
  • Related searches are not all from buyers. People looking for ideas, single items, cheap units and repair services use the same words.

Paid search can work under those conditions if it is set up to find the small group who are ready to commission a project, and to learn from what happens after they make an enquiry (an inquiry, in US usage).

1. Decide what a conversion is before you spend

Google's automated bidding optimises for conversions or conversion value in each auction.[1] A conversion is whatever action you ask Google to count, and the bidding will find more of it. If that is "any form submission", it will find the people most likely to submit a form, whether or not they are buying a kitchen.

Settle three things first:

  1. Which actions count. Usually an enquiry form, a phone call of meaningful length and a booked appointment.
  2. What makes an enquiry qualified. Service area, a full project instead of a repair, a realistic budget and timescale. See how to qualify kitchen renovation leads.
  3. How the outcome gets back to Google. Covered in section 6.

Group searches by what the person is trying to do.

Search intentTypical wordingWorth paying for?
Commissioning a project"kitchen company near me", "kitchen renovation [town]", "kitchen remodeling contractor", "kitchen fitters [town]", "kitchen showroom [town]"Yes. This is the core.
Choosing a style or product"shaker kitchens", "handleless kitchen", "quartz worktops"Sometimes. Test with care and watch qualification rate.
Gathering ideas"kitchen ideas", "small kitchen layouts", "kitchen colours"Rarely. Early research, long way from buying.
DIY and supply"kitchen units cheap", "replacement cabinet doors", "flat pack kitchen"No, unless you sell supply-only.
Repairs and single jobs"worktop repair", "fit a sink", "kitchen tap replacement"No, unless you take small jobs.
Employment and trade"kitchen fitter jobs", "kitchen design course"No.

Wording differs by country. "Kitchen fitter" and "worktop" are British; "remodeler", "contractor" and "countertop" are North American; Australian usage is "kitchen renovation" and "benchtop". Build your keyword list from the terms people use where you trade.

Match types decide how far Google can stray

Each keyword has a match type, which sets how closely a search has to match the keyword before your ad can show. Google describes exact match as showing on searches with the same meaning or intent as the keyword, phrase match on searches that include the meaning of the keyword, and broad match on searches related to the keyword, which can include searches that do not contain its direct meaning.[2]

For a kitchen company with a modest budget, that last definition is the risk. A broad match keyword such as kitchen renovation can reach searches about ideas, costs and DIY. Start with exact and phrase match on project-intent terms. Widen only when you have enough qualified-lead data for automated bidding to tell good searches from bad.

Read the search terms report every week

The search terms report lists the searches that a significant number of people used and that triggered your ads. Google leaves out terms with too little activity, so the report is a partial view of what you are paying for.[3] Any search in it that is not a potential project becomes a negative keyword, which stops your ads showing for it.[4]

A starting list of negatives usually covers jobs and training, DIY and supply-only terms, repair terms, free and second-hand, and the names of retailers you do not want to be compared with.

Two cautions from Google's own documentation: negative keywords do not match close variants, so job does not block jobs, and too many negatives can stop you reaching real customers.[4] Add the plurals and synonyms you see, and do not exclude words that genuine buyers also use.

3. Set the location to where people are

You only want enquiries from places you can serve. Google offers two location options: presence or interest, which reaches people in your target area and people who have shown interest in it, and presence, which leaves out people who are elsewhere and only interested in the area. Google recommends the first as best practice on Search.[5]

For a business that travels to the customer's home, people who are merely interested in your town are usually not customers. Check which option each campaign uses, choose presence unless you have a reason not to, and check your enquiries for addresses outside your area. Google says it cannot guarantee that location targeting is 100% accurate, so expect a few strays whatever you choose.[5]

4. Send the click to a page built for it

Google's guidance is to choose a landing page that closely matches your ad and keywords.[6] Someone who searched for a kitchen company in their town and clicked an ad about design consultations should land on a page about exactly that, with one clear next step.

Landing page experience is one of the three components of Quality Score, alongside expected clickthrough rate and ad relevance. Google describes Quality Score as a diagnostic tool and states that it is not an input in the ad auction, so use it to spot weak pages and ads and do not chase the score itself.[7]

For these searches a dedicated page is usually a better destination than a homepage. The reasons, and what a dedicated page should contain, are in homepage versus dedicated landing page for kitchen Google Ads.

5. Bid on the outcome you want

Smart Bidding, Google's name for the automated bidding described in section 1, uses signals such as device, location, time of day and the search itself to set a bid in each auction.[1] Google recommends judging its results over periods that contain at least 30 conversions.[1] A kitchen company makes few sales, so on sales alone it could wait a long time to reach that number.

So do not optimise towards sales alone: they are the scarcest signal you have. Raw enquiries are a poor sole target too. There are more of them, but they include the poor-quality ones. The causes are set out in why kitchen companies get poor-quality leads.

Use the qualified lead as the main signal. It arrives more often than a sale and sits closer to revenue than a raw enquiry.

6. Tell Google what happened after the enquiry

An enquiry form tells Google only that someone filled it in. Whether that person was a serious buyer is recorded later, in your CRM (the system where you record enquiries and customers) or your diary. Offline conversion imports exist to send that outcome back: Google gives each ad click an identifier, you store it with the lead, and you return it when the lead qualifies or buys.[8]

Google now recommends that advertisers who have not yet set this up start with enhanced conversions for leads, which matches hashed customer details such as an email address instead of relying only on the click identifier.[8] [9]

This step matters for lead quality because it changes what the bidding system is trying to find. How offline conversion tracking works for lead generation explains the mechanics.

7. Measure the whole chain

Report these each week, in this order of importance:

MeasureWhat it tells you
Cost per qualified leadWhether the spend is producing real prospects at a workable price
Qualification rate (the share of enquiries that qualify)Whether targeting and the page are attracting the right people
Appointments bookedWhether enquiries are being handled
Cost per enquiryEfficiency of the page and the click, but not quality
Cost per click and clickthrough rateDiagnostics only

Revenue and gross profit by campaign follow monthly or quarterly, once sales have had time to close. How to calculate cost per qualified lead gives the method.

Common mistakes

  • One campaign for everything. Kitchens, bathrooms and bedrooms are different jobs at different prices, and need separate budgets and pages. Bathrooms have their own guide: Google Ads for bathroom companies.
  • Judging the first month on sales. An enquiry that arrives this month may not become a sale this month.
  • Counting every call as a lead. Suppliers, existing customers and wrong numbers inflate the figures.
  • Paying for your own name without checking why. People who search for your name already know you, so their enquiries can flatter the account's averages.
  • Answering enquiries the next day. The click is paid for whether or not anyone replies. The evidence on response times is in how quickly you should respond.

What to do next

Work out the budget from your own funnel with how much a kitchen company should spend on Google Ads, then test the numbers in the lead economics calculator.

If you trade in the UK and are weighing paid search against a trades directory, see Google Ads versus Checkatrade for kitchen companies.

Limitations

  • Google changes campaign types, settings and defaults regularly. The platform behaviour described here was checked against Google's documentation on the date shown in the sources.
  • This guide covers Search campaigns. It does not assess Performance Max, display or video campaigns.
  • High-Ticket Lead Economics Calculator

    Model a high-ticket lead funnel from ad spend to gross profit: cost per enquiry, cost per qualified lead, customers, ROAS and break-even cost per click.

Sources

  1. 1.About Smart Bidding Google Ads Help. Primary source. Verified .
  2. 2.About keyword matching options Google Ads Help. Primary source. Verified .
  3. 3.About the search terms report Google Ads Help. Primary source. Verified .
  4. 4.About negative keywords Google Ads Help. Primary source. Verified .
  5. 5.Target ads to geographic locations Google Ads Help. Primary source. Verified .
  6. 6.Optimise your ads and landing pages Google Ads Help. Primary source. Verified .
  7. 7.About Quality Score for Search campaigns Google Ads Help. Primary source. Verified .
  8. 8.About offline conversion imports Google Ads Help. Primary source. Verified .
  9. 9.About enhanced conversions for leads Google Ads Help. Primary source. Verified .

Spotted an error? Tell us and we will correct it. Read our editorial policy.

Portrait of Ben Abel

About the author

Ben Abel

Publisher, High Ticket Journal. Founder, Ophiro

Ben Abel publishes High Ticket Journal and is the founder of Ophiro, a customer acquisition agency that builds Google Ads, landing page and lead qualification systems for high-ticket businesses.