Skip to content
High Ticket Journal

Guide · Bathroom renovation

Google Ads for Bathroom Companies

Bathrooms follow the same paid-search principles as kitchens, with two differences that change the sums: the job is usually smaller, and the keywords are shared with plumbers and retailers.

By , founder of Ophiro

Published · Fact-checked · 5 min read

The short answer

How should a bathroom company run Google Ads?

Target searches for a complete bathroom project in your service area, use negative keywords to exclude plumbing, repair and product-shopping searches, and send clicks to a page about bathroom renovation with one clear next step. Because bathroom projects are usually worth less than kitchens, the cost per qualified lead you can afford is lower, so waste that a kitchen company could absorb can make a bathroom campaign unprofitable.

Key takeaways

  • A lower average order value means a lower break-even cost per lead. Work yours out before setting a budget.
  • Bathroom keywords overlap with plumbing, emergency repair and retail searches, so negative keywords do a lot of the work.
  • Specialist services such as wet rooms and accessible bathrooms deserve their own ad groups and pages.
  • Run bathrooms and kitchens as separate campaigns with separate budgets and targets.

What is the same, and what is not

The method in Google Ads for kitchen companies applies to bathrooms without change: decide what counts as a conversion before spending, buy project intent, restrict location to where customers are, send clicks to a matching page, and tell Google which enquiries became qualified leads. (An enquiry, or inquiry in North American spelling, is any first contact. A qualified lead is an enquiry that passes your own checks for a real prospect.)

This guide covers the two things that differ.

Difference 1: the sums are tighter

A bathroom is usually a smaller job than a kitchen: one smaller room, with fewer units and no appliances. If your own order values bear that out, the gross profit on each sale is lower, and with it the most you can pay for a lead.

Illustrative example

The same funnel at two order values

Assume the same conversion rates for both: 50% of enquiries qualify, 60% of qualified leads reach an appointment, 30% of appointments close. That is a lead-to-sale rate of 9%. Assume the same 35% gross margin.

KitchenBathroom
Average project value$25,000.00$9,000.00
Gross profit per sale$8,750.00$3,150.00
Break-even cost per lead$787.50$283.50
Target at 25% of gross profit$196.88$70.88

The figures in this example are assumptions chosen to show the arithmetic. They are not benchmarks, do not describe any country’s market and are not drawn from HTJ research. Amounts are in USD for illustration; the sums work the same way in any currency.

The method is from how to calculate break-even cost per lead. With these assumptions the bathroom company can afford roughly a third of what the kitchen company can pay for a lead. If clicks cost the two companies about the same, the bathroom company has far less room for irrelevant clicks, a weak page or slow follow-up.

So work out your own break-even before anything else, using your real project value, margin and rates. Then be stricter about waste: most of what follows is about removing clicks that cannot become a full project.

Where you can, raise the average order value, because break-even cost per lead rises in step with it. Aiming campaigns at complete renovations or multi-room projects is one way to do that.

Difference 2: the keywords are shared

Bathroom keywords sit next to plumbing, repair and product searches. A shower, a toilet or a bath is something people also repair, replace one at a time and buy off the shelf, so the same words turn up in searches that have nothing to do with a full project.

Search intentTypical wordingWorth paying for?
Commissioning a full project"bathroom renovation [town]", "bathroom remodel contractor", "bathroom fitters near me", "new bathroom installation"Yes. The core.
Specialist projects"wet room installation", "walk-in shower installation", "accessible bathroom", "ensuite installation"Yes. Worth separate ad groups.
Plumbing and repairs"leaking shower", "toilet repair", "emergency plumber", "unblock bath"No, unless you are also a plumbing business.
Product shopping"bathroom suites", "vanity units", "shower enclosures", "tiles"No, unless you retail.
Single-item fitting"fit a toilet", "replace bath", "install shower"Only if small jobs are profitable for you.
Ideas"small bathroom ideas", "bathroom tile ideas"Rarely.
Jobs and training"bathroom fitter jobs", "plumbing course"No.

Terminology varies by market. A bathroom renovation in one market is a bathroom remodel in another; "bathroom fitter" and "suite" are British, "remodeler" and "contractor" North American, and "bathroom renovations" the usual Australian phrase. Build keyword lists from the terms used where you work.

Keep them out with match types and negative keywords

Broad match can show ads on searches that are related to a keyword without containing its direct meaning.[1] With a keyword like bathroom installation, those can be plumbing and retail searches. Start with exact and phrase match, the two narrower settings.

Then build a negative keyword list early and keep adding to it. Negative keywords stop ads showing for searches that include them, but they do not cover close variants, so add synonyms and singular or plural versions as you find them.[2] Typical groups for a bathroom company:

  • Repairs and emergencies: repair, leak, leaking, blocked, unblock, emergency.
  • Retail: buy, sale, cheap, suite, suites, showroom names you do not want to appear against.
  • DIY: how to, DIY, guide, tutorial.
  • Work and training: jobs, vacancies, course, apprenticeship.

Review the search terms report weekly at first, and add the irrelevant searches it shows to the list.[3]

Give specialist work its own ad groups and pages

Wet rooms, walk-in showers and accessible bathrooms are distinct services that people search for by name. Give each one:

  • its own ad group (a set of related keywords with their own ads);
  • ads that name the service;
  • a landing page about that service, with relevant photographs and any accreditation that applies.

Google's guidance is to choose a landing page that closely matches the ad and keywords.[5] Someone who searched for an accessible bathroom should not land on a gallery of luxury ensuites.

If one of these services is worth more to you than a standard bathroom, move it into its own campaign with its own budget.

Location and urgency

Location matters as much as it does for kitchens. Check that campaigns target people in your service area, not those merely interested in it.[4]

Urgency can differ. Some bathroom enquiries are prompted by something failing, and a buyer in that position has a reason to settle on a company quickly, which makes a prompt reply matter more. See how quickly you should respond to an enquiry.

If you sell kitchens and bathrooms

Keep them apart. Run separate campaigns with separate budgets, so the higher-value service does not starve or subsidise the other, and give each its own landing pages. Set separate targets as well: a cost per qualified lead that is healthy for kitchens may be loss-making for bathrooms. Report on them separately, so an average across both does not hide a problem in one.

Qualifying bathroom leads

The six criteria in how to qualify kitchen renovation leads carry over: project, location, budget, timescale, authority and reachability. For bathrooms, put most weight on the first. A single question on the form, "full bathroom, wet room or shower room, or a single item or repair?", separates full projects from small jobs before anyone picks up the phone.

Check the sums before you start

Put your own project value, margin and rates into the lead economics calculator. If the break-even cost per click it shows is close to what clicks cost in your area, the campaign has no margin for error, and the first job is to raise order value or conversion rates, not to spend.

Limitations

  • No benchmark click costs, project values or conversion rates are given. They differ by market, and HTJ has not yet published measured figures.
  • High-Ticket Lead Economics Calculator

    Model a high-ticket lead funnel from ad spend to gross profit: cost per enquiry, cost per qualified lead, customers, ROAS and break-even cost per click.

Sources

  1. 1.About keyword matching options Google Ads Help. Primary source. Verified .
  2. 2.About negative keywords Google Ads Help. Primary source. Verified .
  3. 3.About the search terms report Google Ads Help. Primary source. Verified .
  4. 4.Target ads to geographic locations Google Ads Help. Primary source. Verified .
  5. 5.Optimise your ads and landing pages Google Ads Help. Primary source. Verified .

Spotted an error? Tell us and we will correct it. Read our editorial policy.

Portrait of Ben Abel

About the author

Ben Abel

Publisher, High Ticket Journal. Founder, Ophiro

Ben Abel publishes High Ticket Journal and is the founder of Ophiro, a customer acquisition agency that builds Google Ads, landing page and lead qualification systems for high-ticket businesses.